Chicken Tramper UL Gear Water Bottle Sleeve Review

As the world’s number one fan of hydration reservoirs, one of the biggest challenges I’ve faced on the trail is having to ditch the water bladder on thru-hikes. The convenience of a hassle-free drinking method, combined with the constant reminder to sip throughout the day, is great for day-hikes but perhaps overkill—and even unreliable—on a thru-hike.

While thru-hiking the John Muir Trail this past summer, I struggled to stay hydrated my first week on trail and learned the hard way the repercussions that can come with neglecting your body’s basic needs. Although it was a huge learning lesson, I vowed never to put myself in a dangerous situation like that again.

But what else, besides my own self-scare tactics and a consistent phone alert begging me to drink water, would do the trick?

Cue the Chicken Tramper Ultralight Gear Water Bottle Sleeve.

Chicken Tramper Water Bottle Sleeve on backpack's shoulder strap

The water bottle sleeve is adjustable to each pack’s webbing and holds a tall/skinny water bottle securely in place.

This ultralight mesh water bottle holder sits comfortably on your backpack’s shoulder strap, making it easy to drink on the go. No more stopping to take off your heavy pack for a water break or twisting and turning every which way just to barely retrieve your bottle from the depths of those deep side pockets.

For all you under-hydraters and “work smarter not harder” believers: this one’s for you.

Chicken Tramper Ultralight Gear Water Bottle Sleeve At-a-Glance

MSRP: $30
Capacity: 0.7 liter Smart Water bottle (standard) / 1 liter Smart Water bottle (large)
Weight: 1.4 oz (standard) / 1.6 oz (large)
Dimensions: 8.25″ tall, 3.125″ diameter (standard) / 10.75″ tall, 3.125″ diameter (large)
Materials: X-Pac (VX07), nylon mesh, 1″ nylon webbing

Close-up view of the Chicken Tramper UL Gear water bottle sleeve on pack's shoulder strap

The bottle sleeve sits comfortably on your chest, staying tight against the backpack straps.

Circumstances of Use

I was first introduced to the concept of a water bottle sleeve after my thru-hike of the JMT. I did not have this nifty item on my packing list at the time, but I certainly wish I did after using it over the last couple months.

This fall, I tested the sleeve on hikes that took me over frigid mountain peaks, through thorny brush areas, and on open dirt trails. I used it with multiple backpacks, ranging from 25-liter day packs to 50-liter ultralight packs, adapting to the attachment methods on both daisy chain and gear loop options.

Stand-Out Features

A water bottle holder seems pretty basic, right? It’s a sleeve that holds your water bottle and attaches to your pack’s strap. When I first received this item, I worried I wouldn’t have much to say.

However, CTUG seamlessly integrates a myriad of carefully-planned features into the sleeve design.

Shock cord: At the top of the sleeve, both the standard and large holsters feature an adjustable shock cord with a cord lock. The cord tightens the diameter of the mesh or pulls over the top of a water bottle, thus keeping it from wiggling around. It’s a simple concept that ensures the effectiveness of this product.

Close-up of shock cord and cord lock on Chicken Tramper UL Gear Water Bottle Sleeve

CTUG carefully designed the sleeve with a shock cord to ensure minimum wiggle room while your water bottle sits securely.

Nylon mesh: My biggest concern with this product was that the mesh would snag or pull easily, rendering the pocket useless over time. To test this, I brought the sleeve on a dense brush trail. After a pretty hefty bushwhack, the sleeve still looked to be in great condition, with no concerning rips or tears. Time will be a factor in terms of the product’s longevity, but this short, intensive stint didn’t do damage to the durable mesh.

Adaptability: CTUG claims this sleeve can be attached to essentially any kind of backpack, so I fact-checked this statement and could not find a backpack in my gear arsenal that wasn’t conducive.

Chicken Tramper Water Bottle Sleeve Pros

AccessibilityThe CTUG Water Bottle Sleeve does exactly what it’s intended to do: it adds convenience without taking up “prime real estate” on your pack. Accessing your water becomes significantly easier when the bottle is securely latched onto the front of your body, as opposed to shoved in deep backpack pockets. Now it’s a brief process to get a drink of water, as opposed to taking off your entire pack or shimmying around uncomfortably to reach that impossible spot.

Frees up space: Using a water bottle holster gives you two extra pockets on the sides of your pack to store goodies. I found this helpful when it came to storing fragile items, such as sunglasses or regular glasses, that I worried would break when stuffed inside my pack.

Secure: I was skeptical about the secureness of the sleeve. Would it bounce around as I walked? I was pleasantly surprised to find that the s-clips did their duty. The water bottle sat close to my pack’s shoulder strap and did not feel uncomfortable or heavy after walking for miles.

Close-up of chicken tramper water bottle sleeve attached to backpack daisy chain

Durable: For the shorter stints that this water bottle sleeve endured, it showed few to no signs of distress when put through the wringer. Only time will tell, however, as it would need to endure many more miles to truly be deemed durable.

READ NEXT – The Thru-Hiker Gift Guide: Under $50

Chicken Tramper Water Bottle Sleeve Cons

Luxury item: While this piece of gear certainly made my life a tad bit easier, it is not a necessity. At $30, I can see how this would be an item most would pass on. It’s helpful to own, but would not make or break a trip for me.

Bulky: I did not test the 0.7-liter sleeve, so perhaps this was user error, but the 1-liter sleeve was bulkier than I was expecting it to be. The overall item is lightweight, but the height of the large sleeve was a bit tall for my liking, and was difficult to position on my backpack’s strap where it wasn’t right in my face. The 0.7-liter (standard) sleeve would work just fine for any Smart Water bottle size, given the shock cord to keep it in place.

Difficult S Clips: Upon first use, I followed the CTUG instructions on how to open and close the clips and had no trouble attaching them to the pack’s webbing. Once outdoors and in the elements however, it became a bit trickier. The clips were finicky and difficult to open or snap shut in the cold. For the most part, I would not anticipate needing to remove the sleeve from my backpack very often, but it’s worth noting that it can be challenging, especially in the cold.

Close up of CTUG s-clips and daisy chain webbing

The s-clips on the top and bottom of the sleeve ensure it sits securely on your pack, but can be difficult to open and snap shut.

Limiting: The water bottle sleeve has a 3.125″ diameter, which only fits tall and skinny water bottles, such as Smart Water or similar-style bottles. A Nalgene or other wider bottle would render this item useless.

Final Thoughts

Overall, the Chicken Tramper Ultralight Gear Water Bottle Sleeve is an excellent luxury item for those who don’t mind spending a little extra money for the ease of hydration. And when it comes to the everyday challenges of trail living, you appreciate each moment of convenience. While I don’t see this piece of gear as a necessity on my packing list, its durability, light weight, and convenience make it a great contender for my next thru-hike.

Shop the Chicken Tramper Ultralight Gear Water Bottle Sleeve

Comparable Water Bottle Sleeves

Zpacks Water Bottle Sleeve

MSRP: $29.95
Weight: 0.56 oz
Materials: Dyneema Composite Fabric Hybrid and mesh

Hyperlite Mountain Gear Bottle Pocket

MSRP: $39
Weight: 1.32 oz
Materials: DCH50, durable stretch mesh, and 1/8″ high density foam

Disclaimer: The Chicken Tramper Ultralight Gear Water Bottle Sleeve was donated for purpose of review.

Affiliate Disclosure

This website contains affiliate links, which means The Trek may receive a percentage of any product or service you purchase using the links in the articles or advertisements. The buyer pays the same price as they would otherwise, and your purchase helps to support The Trek's ongoing goal to serve you quality backpacking advice and information. Thanks for your support!

To learn more, please visit the About This Site page.

Comments 3

  • Russ1663 : Dec 3rd

    Good points all. I chose the CTUG 1 liter. It holds my LifeStraw Flex water bottles really well

    I have the 1 liter carrier on both my day pack and larger AT pack.

    Yes, the connector is a bit at first but I worked it out.

    No problem, it’s a great overall product

  • Rolf Asphaug : Dec 8th

    Really nice, comprehensive review. I have three water bottle sleeves from three different manufacturers, and the Chicken Tramper Gear version is by far my favorite because it keeps its shape when empty. It’s really easy for me to slip my bottle back in the sleeve when I’m done drinking, without having to fumble around with the opening or take my eyes off the trail. A minor point maybe, but when you’re using a sleeve day after day it’s a factor.

  • Ryan : Mar 8th

    Are those clips the only attachment method? I have a Gregory pack where the webbing is secured behind a polyester overlay panel so I don’t think there is anything to clip onto.


What Do You Think?